2-way splitter for SAT IF distribution. For the symmetrical distribution of satellite signals, -6.2 dB attenuation. Equipped with F-connector. Supports DC feed for LNC on all ports. Highly durable diecast housing. Frequency range 5-2400 MHz.
Fixed duoblock 6 degrees to receive signals from Astra1 and Hotbird. Also suitable for use with the Hirshmann steel dish (RH-DISH/xxx). Brackets LNB holder: Plastic Plastic LNB holder: Yes LNB angle: 6 degrees LNB size: Ø 40mm Packing size: 1 pcs. Remarks: Ø 25 mm adaptor - optional extra Accessories LNB cover Packing size: 1 pcs. Remarks: Ø 25 mm adaptor - optional extra
Active wideband micro amplifier that can change your UHF-aerial with F-connector to an active antenna, just by adding this genious little amplifier. Works with 5 VDC from your digital Set Top Box, or with 5-12 VDC from any power supply. Ideal for DVB-T signals. Supplied from STB 5 VDC or PSU 5-12VDC. 1 input/1 output amplifier.
Satelliitin haaroitin satelliitti f jaotin 17 db / 5-2400 mhz - 8 ulostuloa. iax 8-way splitter ideal for SAT-IF and MATV distribution networks.
Lte 700 filter 5-694 mhz. The LTE 700 Filter prevents 4G mobile services causing interference with terrestrial TV signals.
Teräs satelliitin seinäkiinnike 350 mm / 15 mm. Seinäkiinnike antennille, halk. 15mm, etäisyys seinästä 35cm. Diameter: Ø 15 Material: Steel Clearence from wall: 350 mm Height: 200 mm
The Pocket Installer is a perfect companion to go with a couple of Self-intall connectors for home installation. The pocket installer combines a RG59/RG6 cable stripper with mechanical stop for proper stripping length and an 11 mm spanner. The pocket installer makes the cable preparation much easier and precise, while the spanner can be used for proper tightening.
TD - 3°-20° FlexiBlock - 4xLNB. Multi-blocks. A 3° to 20° Multi-block for four Ø40 mm LNBs with min. 4° between the satellite positions is available for the TD-series. T300727 and T300827 are identical
MFA 621 - BIII / UHF + FM Kanavat FM + 5-12 / 21-60 Vahvistus 5-15 / 20-35dB Kohinaluku < 2,5dB 2 tuloa / 1 lähtö, max. 103 dBuV Käyttöjännite 12-24V Suunniteltu erityisesti Suomen ja Ruotsin HDTV -markkinoille ! Suunnittelussa kiinnitetty erityishuomio riittävään vahvistukseen ja pieneen kohinalukuun, UHF:n ylätaajuudet rajattu 790 MHz:n niiden siirtyessä pois TV-käytöstä. Frequency range Channels: 21-69 Band: BIII(DAB)/UHF Frequency range UHF: 174-230/470-790 mHz Elements Elements: 28 pcs. Gain Gain - UHF: 12.0 dB Front to back ratio Front to back ratio - horisontal: > 25.0 dB Beamwidth Windload Beamwidth horisontal: +/- 24 degrees Windload: 45N Dimensions Length: 1285 Width: 330 Weight: 0.680 kg Mechanical Material: Aluminium Connector: F-con
IFB 404 - Indoor booster amplifier. Triax IFB booster amplifiers give you the benefit of reliability, long lifetime and quick installation when you need to distribute the signal to more rooms. Booster amplifier for MATV. F-connector. Frequency range - FP Frequency range: UHF/VHF Gain - FP Gain 7-17 dB Input-output Number of inputs: 1 pcs. Number of outputs: 2 pcs. Noise figure Noise figure VHF: < 4.0 dB Noise figure UHF: < 5.0 dB Loss_all Impedance: 75 Ohm Output level Output level IMD 3, EN 50083-5: 2 X 107.0 dBµV Connections RF connector - input: F-female RF connector - output F-female Operating conditions Power supply: 230 V Power consumption: 3W Operation temperature: 0...+50 degrees Dimension accessories (H x D x W): 61 x 44 x 118 Weight: 0.400 kg Certification: CE Remarks: 1 attenuator
Disruption free installation from rooftop to outlet. Reliable high quality aerials secures end-consumer satisfaction. Saves time on installation with semi-assembled aerials. TRIAX aerials are wideband and suitable for horizontal or vertical mounting. TRIAX aerials covers the frequency range 174...230 MHz (ch. 5...12). TRIAX aerials are supplied with a light alloy metal boom, made of 18x18mm square tubes. They are provided with brackets for masts up to Ø60 mm.
Unparalleled gain and rejection performance. Designed to receive DTT (Digital Terrestrial TV) signals in 470-790 MHz range (ch. 21-60). Rejects 4G/LTE signals in 791-862 MHz range using Triax’s “Antenna Low Pass System”. Sealed dipole house with rear pointing F-connector for optimal TV-signal performance. Resistant to extreme weather conditions (made from aluminium, magnesium and manganese alloy). Adjustable brackets for masts up to 60 mm. Bracket type: Rear mast bracket. Packing: Individual color box, 5 pcs in outer carton.
Unparalleled gain and rejection performance. Designed to receive DTT (Digital Terrestrial TV) signals in 470-790 MHz range (ch. 21-60). Rejects 4G/LTE signals in 791-862 MHz range using Triax’s “Antenna Low Pass System”. Sealed dipole house with rear pointing F-connector for optimal TV-signal performance. Resistant to extreme weather conditions (made from aluminium, magnesium and manganese alloy). Adjustable brackets for masts up to 60 mm. Bracket type: Rear mast bracket.
The Triax MFA 661 is a single input UHF (Ch. 21-60) low noise, highly RF-shielded mast amplifier within a modern Anthracite plastic housing for mounting at the antenna mast or under the roof.The MFA 661 amplifier has a built-in LTE filter to effectively suppress LTE downstream signals above Ch. 60 (from 791 MHz) and is capable of sustaining strong input signals of more than 95 dBuV from the antenna without overloading. The amplifier is easy, quick and safely mounted by means of the cable binder which can be detached again from the mast without any problems. Wall mounting is also possible. Cables are mounted by means of F-connectors. The amplifier is voltage fed through the output. The power supply range (5-24 VDC) together with an exceptional ripple suppression, makes it ideal to be supplied with 5 Volt from a DVB-T receiver, TV set or from an external 5-24 Volt DC Power Supply.
Kätevän kokoinen Ufo-antenni, jota voi käyttää missä vaan, myös matkailukäytössä. Ei sisällä virtalähdettä. Colour & Packing Colour: White Plastic reel 100m: yes Construction Inner conductor - dimension: 1.02 ± 0.02 Inner conductor - material: Cu Dielectric - dimension: 4.8 ± 0.1 Dielectric - material: PE gas injected First shield - foil 1 - overlap: 20% First shield - foil 1 - material: Al/Pet/Al tape - unbonded Second shield - braid material: Alu Second shield - braid coverage: 43% Anti migration foil - material: PE tape Jacket - dimension: 6.8± 0.1 Jacket - material: PVC Minimum bending radius - single/repeated: 35/70 Electrical Impedance: 75 ± 3 Ohm Capacitance: 52 Velocity ratio: 82% Inner DC resistance: < 22Ohm/km Outer DC resistance: < 65Ohm/km Attenuation (at 20°C) @ 5 MHz: 1.9dB/100 m @ 50 MHz: 5.0dB/100 m @ 200 MHz: 9.63dB/100 m @ 470 MHz: 13.5dB/100 m @ 862 MHz: 20.0dB/100 m @ 1000 MHz: 21.49dB/100 m @ 1350 MHz: 23.5dB/100 m @ 1750 MHz: 26.5dB/100 m @ 2150 MHz: 31.2dB/100 m @ 2400 MHz: 33.1dB/100 m @ 3000 MHz: 38.0dB/100 m Transfer impedance @ 5-30 MHz: < 15mOhm/m Structural Return Loss @ 5-470 MHz: = 21 dB @ 470-1000 MHz: = 20 dB @ 1000-2000 MHz: = 18 dB @ 2000-3000 MHz: = 16 dB Screening attenuation 30-1000 MHz: = 75 dB 1000-2000 MHz: = 65 dB 2000-3000 MHz: = 55 dB Class Class (according to EN 50117-2-4): B
Ulkoantenni 28 db fm / dab / vhf / uhf. UFO 170 Digital 4G/LTE 700 Protected Receives FM/VHF/DAB/UHF signals Surface-treated to withstand impacts from saltwater and weather conditions. TETRA safe
Vahvistin 30 db 47-1006 mhz 1 ulostulo. Triax GHV 500 series is a low noise coaxial apartment- distribution amplifier, for use in smaller MATV distribution networks in multi dwelling houses.
The multi-port apartment amplifier gains the TV and FM signal provided from a CATV network to several antenna wall outlets within the home. The amplifier is preferred to use in special distribution networks where the TV/FM broadcast path and Internet DATA DOCSIS path are devided. The amplifier gains only the downstream broadcast signal and the return path is blocked. The amplifier is easy adjustable to the different transmission conditions of the network.
Vahvistin 35 db 47-1006 mhz 1 ulostulo. Triax GHV 900 series is a low noise coaxial house- and apartment- distribution amplifier, for use in smaller CATV distribution networks in multi dwelling houses.
The GHV 940 is a low noise coaxial (NE4) House Distribution Amplifier, for use in medium to large CATV distribution networks in multidwelling houses. The GHV 940 Distribution Amplifier has a modular design with return path, all-on-board for easy setting and installation. Rotary switches and jumpers provide for readable, easy and reproducible setting of attenuation and equalization, maintaining a non-breakable signal path down- and upstream to avoid down-time.