OKdo tuotteet | www.kauppasatama.fi

OKdo Raspberry Pi 4 Model B 2-piece Slide Case, Black (bulk)

OKdo Sliding Black Case has been specifically designed for use with the Raspberry Pi 4 Model B. It is a 2-piece rugged clear ABS plastic case providing protection whilst allowing access to all its ports and PINs.

Dimensions(WxDxH): 95x63x29mm

OKdo Raspberry Pi Slide Case kotelo, bulk-pakattu, valkoinen

Raspberry Pi 4 Model B:lle suunniteltu kotelo. Koostuu kahdesta osasta, jotka on valmistettu valkoisesta ABS-muovista. Tietokone asetetaan näistä yhteen, minkä jälkeen toinen osa liu"utetaan paikalleen.

Mitat (LxSxK): 63 x 95 x 30 mm

OKdo Raspberry Pi 2-piece Slide Case, Clear (bulk)

OKdo Sliding Clear Case has been specifically designed for use with the Raspberry Pi 4 Model B. It is a 2-piece rugged clear ABS plastic case providing protection whilst allowing access to all its ports and PINs.

Dimensions(WxDxH): 63x95x30mm

OKdo Raspberry Pi 4 Model B 3-piece Standard Case, Black (bulk)

OKdo Standard Black Case has been specifically designed for use with the Raspberry Pi 4 Model B. It is a 3-piece rugged clear ABS plastic case providing protection whilst allowing access to all its ports and PINs.

Dimensions(WxDxH): 62.2x93.7x31.5mm

OKdo Raspberry Pi 4 Model B 3-piece stand case, white (bulk)

The OKdo Standard White Case is specially designed for the Raspberry Pi 4 Model B. It is a 3-piece robust clear ABS plastic chassis that provides protection while providing access to all its ports.

Dimensions (WxDxH): 62.2x93.7x31.5 mm

OKdo Raspberry Pi 4 Model B 3-piece stand case, clear (bulk)

The OKdo Standard Clear Case is specially designed for the Raspberry Pi 4 Model B. It is a 3-piece robust clear ABS plastic chassis that provides protection while providing access to all its ports.

Dimensions (WxDxH): 62.2x93.7x31.5 mm

OKdo Power supply for Raspberry Pi 4 Model B, USB-C, 3A, black

An OKdo high quality and reliable plug-in AC-DC adapter for converting AC mains current into a 3A, 5.1V DC using a USB-C type connector. This power supply comes with four regional interchangeable heads.

• 1.5m cable length
• 5.1V/3A USB-C Power supply
• Designed for the Raspberry Pi 4 Model B
• Interchangeable plugs (BS 1363, Europlug, NEMA, AS/NZS 3112)

OKdo 16GB MicroSD card, NOOBS pre-installed, adapter included, MicroSDHC, black

16GB MicroSD card with operating system installation manager New Out Of Box Software (NOOBS) pre-installed. A full-sized SD-adapter is included in the package

• NOOBS pre-installed
• 16GB Storage capacity
• Designed for the Raspberry Pi 4 Model B single-bord computer
• Operating systems supported: Raspbian, Pidora, OpenElec, RaspBMC, RISC OS and Arch Linux

OKDO OKdo Raspberry Pi 4 Basic Kit, EU version, 4 GB, incl. accessories, black

The Raspberry Pi Basic Kit contains everything you need to get up and running with a Raspberry Pi 4 and is perfect for someone looking to start their Pi adventure. The kit includes our most popular accessories to help you on your coding journey.

• Raspberry Pi 4 – 4GB
• 2 metre HDMI cable
• 16GB SD card with Noobs software installed
• Official power supply
• Okdo sliding case

OKDO Pi 4 Accessories starter kit + Raspberry Pi 4 Model B 4GB, white

This exclusive 8-piece Raspberry Pi 4 starter kit from OKdo includes everything you need (it really does) to get going in the world of Raspberry Pi– from all the hardware in a single box, to access to an online step-by-step guide as well as projects to get up and running faster than ever, effortlessly. Each kit contains the best performing Raspberry Pi 4 Model B board along with a power supply, 2 X micro HDMI cables for dual display, SD Card Reader and a 32GB micro SD card with NOOBS operating system preloaded. As well as 3 x heat sinks and a unique aluminium case with inbuilt fan for better thermal management to address a known issue with the Pi 4.

Whats included?
• Raspberry Pi 4 Model B 4GB board.
• Power supply.
• USB to USB-C cable with in-line switch.
• 2 x Micro HDMI to HDMI cables.
• SanDisk 3D Gen3 X3 256Gb 2-Plane NAND Flash Die for 32GB MicroSD Card. (with NOOBS 3.1.1 preloaded)
• SD card reader.
• 3 x Heat sinks.
• Raspberry Pi case with an integrated fan.