Tuoteluettelo

YRITYS | TOIMITUSEHDOT | YHTEYSTIEDOT | KIRJAUDU / REKISTERÖIDY

Tuotealueet

Tuoteluettelo

TUOTEALUEET Tuoteluettelo

Toimitukset Matkahuollon kautta

Toimitukset Postin kautta

ICY DOCK tuotteet

ICY DOCK, dual 2.5ö SSD/HDD Mounting Kit/Bracket.

ICY DOCK, dual 2.5ö SSD/HDD Mounting Kit/Bracket.

ICY DOCK EZ-FIT Lite - Asennuskehikko 2x2,5"-yksikön asentamiseen 3,5"-paikkaan, musta

ICY DOCK EZ-FIT Lite on erinomainen valinta kun tahdot asentaa yhden tai kaksi SSD-laitetta/2,5" kiintolevyä 3,5 "-paikkaan. Asennuskehikossa on pikaliitin, jonka ansiosta et tarvitse ruuveja kun kiinnität kiintolevyt/SSD-laitteet asennuskehikkoon.

- Sopii 7mm ja 9,5mm korkeille kiintolevyille tai SSD-laitteille.
- Pikaliitin.

Mukana MB290SP-B, 4xruuvia ja käyttöopas.

Mitat(LxSxK):102x146x25mm.

Varastossa

62 kpl

MB290SP-B

Heat sink set for M.2 2280 SSD, aluminium, 10 mm thick

Heat sink set for M.2 2280 SSD, aluminium, 10 mm thick

ICY BOX IB-M2HS-70, heat sink for 2280 M.2 SSD"s, black The principle is passive cooling for M.2 SSDs with a length of up to 80 mm, which results in more power. For easy installation everything is included in the package. Passive heat sink for M.2 2280 SSD Improves the heat distribution of M.2 SSDs Includes 3x two silicone thermal pads to conduct heat Can be used on motherboards or M.2 adapters Easy to install, easy to remove, low profile

Varastossa

2 kpl

IB-M2HS-70

ICY DOCK ExpressCage Extra tray for MB324 Series black

ICY DOCK ExpressCage Extra tray for MB324 Series black

ICY DOCK ExpressCage Extra tray for MB324 Series black. ICY Dock ExpressTray MB324TP-B - Storage drive carrier (caddy) with hot-swappable drive carrier - 2.5"

Varastossa

2 kpl

MB324TP-B

ICY DOCK sis. tallennuskotelo 1x3,5", 2x2,5" HDD, 1x5,25", musta

ICY DOCK sis. tallennuskotelo 1x3,5", 2x2,5" HDD, 1x5,

ICY DOCK Flex-Fit Trio, sisäinen tallennuskotelo 1x3,5" ja 2x2,5" SATA/SSD kiintolevyille, vaatii 1x5,25"-paikan, muovinen, musta

Innovatiivisesti suunniteltu tallennuskotelo ICY DOCKilta mahdollistaa jopa kolmen kiintolevyn asentamisen yhteen 5,25"-paikkaan. yhden 3,5" ja kaksi 2,5"-SATA/SSD kiintolevyä. Huomaa, että 2,5" levyjen korkeus ei saa ylittää 9,5mm.

Kotelon takaosassa irti napsautettava pölyfiltteri on tarkoitettu irroitettavaksi ja eteen kiinnitettäväksi estämään pölyn pääsyä kiintolevyihin. Pölysuoja voidaan vaihtaa muihin lisäravikkeisiin jos toivotaan saada useampia 2,5" SATA/SSD-kiintolevyjä, muistikortinlukija tai tuuletinohjain mahtumaan koteloon.

2,5" kiintolevyt on helppo asentaa ilman ruuveja, kun taas 3,5" kiintolevy vaativat kiinnityruuvit pysyäkseen tulevasti paikoillaan.

Mukana ruuvit sekä käyttöopas mukana pakkaksessa.

Mitat (LxSxK): 148,5x170x41,3mm

Varastossa

1 kpl

MB343SP

ICY DOCK MB610SP EZ-FIT Trio, fit 3x2.5" SSD/HDDs in one 3.5" Drive Ba

ICY DOCK MB610SP EZ-FIT Trio, fit 3x2.5" SSD/HDDs in one 3.5

ICY DOCK MB610SP EX-FIT Trio, fit 3x2.5" SSD/HDDs in one 3.5" Drive Bay, black The EZ-FIT Trio MB610SP is the first 2.5ö SSD bracket that converts a single internal 3.5ö hard drive bay into 3 x 2.5ö SSD or HDD slots. With the EZ-FIT Trio SSD bracket’s tool-less Slim-U drive tray, you can easily add and remove drives without using tools or screws. The Slim-U drive tray is compatible with 5mm, 7mm, 9.5mm, 12.5mm and 15mm height 2.5ö SSD or HDD which allow you mix and match the SSD or HDD with different drive height to create your 2.5ö storage array. The EZ-FIT Trio MB610SP is a perfect SSD / HDD bracket for any system where multiple 2.5ö drive slots are not desirable. The EZ-FIT Trio uses our latest drive tray system called Slim-U, a light weight yet sturdy drive tray that supports tool-less drive installation. With Slim-U tray system, the drive installation can’t be easier, simply align the four screw holes of your 2.5ö drive with the built-in screws on the Slim-U tray, and then insert the Slim-U tray into the bracket, connect the power and data cables to the drive and you are all set! To remove the drive, just open the side panel of the case, unplug the cables from your drive and then pull the Slim-U tray out from the bracket. Supported Drive Sizes: 3 x 2.5ö Drive (5-7mm height) 1 x 2.5" drive (9.5-15mm height) + 1 x 2.5" Drive (5-7mm height) Dimensions(WxDxH): 101.6x154.5x26mm Weight: 125G

Varastossa

1 kpl

MB610SP

2x 2.5" in 1x 3.5" internal bracket black incl cables

2x 2.5" in 1x 3.5" internal bracket black incl cables

ICY DOCK EZ-Fit Lite MB290SP-B, Dual 2.5" HDD mounting bracket for internal 3.5"-slot, black The EZ-Fit Lite MB290SP-B is a great choice if you’re looking to install 1 or 2 SSDs/2.5ö HDDs into a internal single 3.5ö drive bay. If you’re looking for storage density, compatibility, flexibility, and durability without the hassle of a complicated installation, go with the EZ-Fit Lite MB290SP-B. It’s never been easier to effortlessly install 2.5ö drives in a system. We, IcyDock, put a lot of thought into the design to fulfill the needs of our customers, whether they’re building Home Theater Systems (HTPC), Gaming PCs, or Mini-IPX systems. Our EZ-Fit Lite MB290SP-B certainly doesn’t disappoint. Durable one-piece design Anti-Vibration design for improved reliability Fits 2 x 2.5ö SATA/IDE SSD/HDD into a single internal 3.5ö drive bay Compatible with 2.5ö SSD & HDD with 7mm to 9.5mm drive height Quick release eject mechanism for hassle free tool-less drive installation Universally designed screw placement for maximum compatibility 60 screw holes provide maximum flexibility of installation Package contents: MB290SP-B, screws and user manual

Varastossa

2 kpl

MB290SP-1B

ICY DOCK EZConvert Lite 2.5ö - 3,5ö SAS/SATA, 15mm korkeus, musta

ICY DOCK EZConvert Lite 2.5ö - 3,5ö SAS/SATA, 15mm korkeus, must

ICY DOCK kiintolevynmuunnin, 2,5" SATA- tai SSD-levy 3,5" paikkaan, sopii yhteen korkeintaan 15 mm korkeiden levyjen kanssa, SATA 6 Gbps, musta Tämä muunnin soveltuu kuluttajille ja OEM-laitevalmistajille, jotka haluavat asentaa lisää 2,5 tuuman kiintolevyjä tietokoneeseen. EZConvert Lite MB882SP-1S-3B sovittaa kaikki standardin mukaiset 2,5" SATA- ja SSD-levyt 3,5 tuuman paikkaan sopiviksi. Muunnin tukee lisäksi SAS-kiintolevyjä, joten se mahdollistaa yksikanavaisen SAS:n käytön SAS-väylää tukevissa järjestelmissä. Yhteensopivat kiintolevyjen korkeudet: 7 mm / 9 mm / 12,5 mm / 15 mm Liitäntä: 7-pinninen SATA (tukee SAS Single Channel -tekniikkaa) Virransyöttö: 15-pinninen SATA Siirtonopeus: jopa 6 Gbps (kiintolevyn nopeudesta riippuen) Pakkauksen sisältö: MB882SP-1S-3B, ruuvit ja käyttöopas Mitat (LxSxK): 131,6 x 146,6 x 25,4 mm Paino: 91,5 g

Varastossa

40 kpl

MB882SP-1S-3B

ICY DOCK EZConvert Air, 1x2,5", SATA 6Gb/s, 1x3,5"-paikka, alu, hopea

ICY DOCK EZConvert Air, 1x2,5", SATA 6Gb/s, 1x3,5"-paik

ICY DOCK EZConvert Air, sisäinen tallennus 1x2,5" SATA/SSD-kiintolevylle, SATA 6Gb/s, vaatii 1x3,5"-paikan, alumiini/muovi, hopea

Sisäinen ICY DOCK tallennuskotelo, johon mahtuu yksi 2,5" SATA/SSD kiintolevy, korkeudeltaan max 15mm. Liitetään ohjainkorttiin tai emolevyyn SATA-kaapelilla.

Mitat(LxSxK): 145,6x101,6x25,4mm.

Varastossa

30 kpl

MB382SP-3B

ICY DOCK kiintolevykasetti MB991- ja MB994-sarjoille, 1x2,5" SATA/SAS

ICY DOCK kiintolevykasetti MB991- ja MB994-sarjoille, 1x2,5"

ICY DOCK kiintolevykasetti MB991- ja MB994-sarjoille, paikka 1 x 2,5" SATA-, SAS-, tai SSD-levylle, musta Ylimääräinen kasetti ICY DOCKin MB991- ja MB994-sarjoille. Sisältää yhden paikan 2,5 tuuman SATA-, SAS- tai SSD-levylle. Sopii kiintolevyille, joiden korkeus on 7 - 15 mm. Mitat (LxSxK): 70 x 115 x 18 mm

Varastossa

17 kpl

MB991TRAY-B

2.5" to 3.5" Adapter/Converter SATA black

ICY DOCK 2.5" to 3.5" Adapter/Converter SATA black

2.5" to 3.5" Adapter/Converter SATA black. Cremax ICY Dock MB882SP-1S-2B - Storage mobile rack - 2.5" - 3.5" to 2.5" - SATA 6Gb/s - 6 Gbit/s - SATA 6Gb/s - black

Varastossa

123 kpl

MB882SP-1S-2B

ICY DOCK DuoSwap MB971SPO-B, 1x3,5" kiintolevy ja optinen asema, musta

ICY DOCK DuoSwap MB971SPO-B, 1x3,5" kiintolevy ja optinen as

ICY DOCK DuoSwap MB971SPO-B kiintolevykasetti, paikat 3,5" kiintolevylle ja optiselle asemalle, musta Kiintolevykasetti, joka vie tilaa yhden 5,25 tuuman paikan verran. Tuotteen alaosassa on lisäksi paikka ultraohuelle optiselle asemalle. Kiintolevyn asentaminen tapahtuu erittäin helposti, sillä siinä ei tarvita ruuveja eikä erillisiä työkaluja. Tuotteessa on virtakytkin ja merkkivalo, joka näyttää sen toimintatilan. Virransyöttö tapahtuu yhdellä 15-pinnisellä SATA-virtaliittimellä. 1 x 3,5" kiintolevy, joka on enintään 26,1 mm korkea 1 x ultraohut optinen asema Kiinnitetään tyhjään 5,25" paikkaan Dataliitännät: 2 x SATA, 7-pinninen Virransyöttö: 1 x SATA-virtaliitäntä, 15-pinninen Mitat (LxSxK): 146 x 173,8 x 42 mm Paino: 307 g

Varastossa

1 kpl

MB971SPO-B

ICY DOCK ToughArmor EZ-Slide Micro Tray

ICY DOCK ToughArmor EZ-Slide Micro Tray

Icy Dock MB996TK-B EZ-Slide Micro Tray, blac/silver Compatible hard drive caddy (tray) for ICY DOCK ToughArmor MB996, MB411 Seres and fits in MB991U3-1SB Up to 9.5mm drive thickness 2.5" SATA I / II / III hard drive and SSD Dimensions: (WxDxH) 117.4 x 69.8 x 11.5 mm Weight: 52.5g

Varastossa

2 kpl

MB996TK-B

ICY DOCK, sisäinen kiintolevykasetti, jossa paikka 1x2,5" SATA-/SSD

ICY DOCK, sisäinen kiintolevykasetti, jossa paikka 1x2,5" SA

ICY DOCK, sisäinen kiintolevykasetti, jossa paikka 1x2,5" SATA-/SSD-kiintolevylle, vie 1x3,5"-paikan, SATA 1,5/3/6Gb/s, metalli, hopea

Tekee 2,5"-kiintolevyn asentamisen helpoksi 3,5"-paikkaan.
Tai 2,5"-kiintolevyn muuntamisen, jotta voitaisiin asentaa tallennuskoteloon, jossa on paikka 3,5"-kiintolevyille.

Mitat (LxSxK):106 x144x25mm

Varastossa

77 kpl

MB982SP-1S

ICY DOCK ExpressCage 2x2.5" SATA/SAS in 1x3.5" bay mobile rack black

ICY DOCK ExpressCage 2x2.5" SATA/SAS in 1x3.5" bay mobi

ICY DOCK ExpressCage 2x2.5" SATA/SAS in 1x3.5" bay mobile rack black. ICY Dock ExpressCage MB742SP-B - Storage drive cage - 2.5" - black

Varastossa

1 kpl

MB742SP-B

ICY DOCK ToughArmor 2.5" SATA Mobile Rack for 3.5" Device Bay

ICY DOCK ToughArmor 2.5" SATA Mobile Rack for 3.5" Devi

ICY DOCK MB991SK-B, internt kabinett för 1x2,5" SSD/SATA-hårddisk, SATA 6Gb/s, tar upp 1x3,5"-plats, låsbar, metall, svart

Internt kabinett för 2,5" SSD/SATA-hårddiskar, tar upp en 3,5 plats i din dator, är ett utmärkt kompliment till några av ICY DOCKS MB994 serie av externa och interna lagringskabinett.

Mått(BxDxH): 101x135x26mm.

Varastossa

4 kpl

MB991SK-B

Icy Dock MB991IK-B 2.5" SATA/SAS Mobile Rack for use in 3.5"

Icy Dock MB991IK-B 2.5" SATA/SAS Mobile Rack for use in 3.5&

ICY DOCK sisäinen kotelo 1x2,5" SAS/SATA-levylle 1x3,5"-paikkaan, SAS/SATA 6Gb/s, lukittava, metallia, musta

Virransyöttöön 15-pin SATA-virtaliitos.
Asennusruuvit mukana.
Mitat (LxSxK): 101x135x26mm.

Varastossa

27 kpl

MB991IK-B

ICY DOCK sisäinen kotelo, 2x2,5" SSD/HDD, 6Gb/s, yksi 3,5"-paikka

ICY DOCK sisäinen kotelo, 2x2,5" SSD/HDD, 6Gb/s, yksi 3,5&qu

ICY DOCK Tough Armor, sisäinen tallennuskotelo 2x2,5" SATA/SSD-kiintolevyille, SATA 6Gb/s, vaatii 1x3,5" paikan, RAID 0/1, alumiini, musta

Kiintolevyt laitetaan ulosvedettäviin Hotswap-kasetteihin ja niiden jäähdytyksestä pitää huolen tietokonekotelon sisällä olevat tuuletin. Kotelo liitetään ohjainkorttiin (ei mukana) kahdella SATA-kaapelilla. Edessä olevat LED-lamput näyttävät ovatko kiintolevyt aktiivisia.

Mukana ruuvit, kaäyttöohje ja avaimet.
Mitat (LxSxK): 133x101.2x25.4mm.

Varastossa

10 kpl

MB992SK-B

Suosittu

4x 2.5" SATA/SAS in 1x 5.25" bay mobile rack screwless trays black

4x 2.5" SATA/SAS in 1x 5.25" bay mobile rack screwless

ICY DOCK ExpressCage MB324SP-B, 4x2.5" SAS/SATA HDD/SSD in one 5.25"-slot, black ExpressCage MB324SP-B brings to you our highly consumer-friendly enclosure made for anyone that requires affordable storage density. Fit up to 4 x 2.5ö SATA/SAS HDD/SSD (7mm-12.5mm) into a single 5.25ö bay with the ability to hot swap for easy drive replacement and single channel SAS support (SAS host required). Tool-less drive installation makes installing your drive more simple than ever and optional bottom tray screw holes are provided for extra protection and added stability. With a strategically placed 40mm cooling fan placed behind the unit and all around ventilation, your drives will stay cooler than the Arctic. An adjustable fan speed jumper lets you choose between HIGH, LOW, or AUTO smart cooling so you can set it based on your preference. Power users and system builders alike will enjoy the space saving, tool-less and hot-swap features provided by the ExpressCage MB324SP-B. Host Interface: 4 x 7pin SATA Drive Fit: 4 x 2.5" SATA or SAS (single channel) HDD/SSD Compatible Drive Heights: 7mm, 9.5mm & 12.5mm Device Fit: Single 5.25" half height device bay Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed) Power Input: Single 15pin SATA power port Insert& Extract connection Via: Direct SAS/ SATA hard drive connection Structure: Plastic and metal Drive Cooling: 40mm rear cooling fan Fan Speed Control: High / Low / Auto jumper Power Indicator: Solid blue LED HDD Access Indicator: Blinking blue LED Dimensions(WxDxH): 145.8x140.5x41.3mm Weight: 440g

Varastossa

15 kpl

MB324SP-B

ICY DOCK, Sis. kotelo, 4x3,5" SATA, 3x5,5"-paikkaa, mu

ICY DOCK, Sis. kotelo, 4x3,5" SATA, 3x5,5"-paikkaa, mu

ICY DOCK, Sisäinen kotelo 4x3,5" SAS/SATA-kiintolevyille, vie 3x5,5"-paikkaa, lukittava, 1x120mm tuuletin, musta

Ulkonäöltään massasta erottuva sisäinen kotelo, johon mahtuu jopa neljä 3,5" SAS/SATA-kiintolevyä ja vie ainoastaan kolme 5,25"-paikkaa kotelossasi.

Hiljainen 120mm tuuletin, jonka edessä oleva LED-valaistus pitää levysi viileinä. Kun tahdon vaihtaa tuulettimen, ruuvaat vain mukana tulleen irti ja asennat toivomasi 120mm kokoisen tuulettimen. Tuulettimen edessä on tuuletinfiltteri, joka voidaan irroittaa ja puhdistaa niin, että tuuletin pysyy puhtaana ja hiljaisena.

Mukana asennusruuvit sekä käyttöohje.

Mitat(LxSxK): 145x126x223mm.
Paino: 904g.

Varastossa

2 kpl

MB074SP-B

6x 2.5" SATA/SAS in 1x 5.25" bay mobile rack screwless trays black

6x 2.5" SATA/SAS in 1x 5.25" bay mobile rack screwless

ICY DOCK ExpressCage MB326SP-B, 6x2,5" SATA HDD/SSD in one 5.25" slot, black The ExpressCage MB326SP-B brings to you ICY DOCK"s highly consumer-friendly enclosure made for anyone that requires high storage density. The MB326SP-B fits up to 6 x 2.5ö SATA HDD/SSD (5mm - 9.5mm) into a single external 5.25ö bay with the ability to hot swap for easy drive replacement. The ExpressCage name reflects the tool-less drive installation design that makes installing your drive just as simple as a tray-less device, and optional bottom tray screw holes are provided for extra protection and added stability. With dual 40mm cooling fans placed behind the unit and all around ventilation, your drives will stay cooler than the Arctic. The fan speed slider switch lets you choose between HIGH, LOW, or AUTO smart cooling, so you can set it based on your preference. Host interface: 6x7-pin SATA Drive fit: 6x2.5" SATA HDD/SSD Compatible HDD heights: 5mm, 7mm, 9.5mm Installs in one empty 5.25" slot Power Input: 2x15-pin SATA power Structure: Plastic and metal Fan sizes: 40mm Fan speeds: High / Low / Auto Power indicator: Solid Blue LED HDD access indicator: Blinking blue LED Dimensions(WxDxH): 145.8x146.5x41.3mm Weight: 438g

Varastossa

1 kpl

MB326SP-B

Portable M.2 NVMe PCIe SSD to USB 3.2 Gen 2(10Gbps) External Enclosure

Portable M.2 NVMe PCIe SSD to USB 3.2 Gen 2(10Gbps) External Encl

Icy Dock IcyNano Portable M.2 NVMe PCIe SSD to USB 3.2 Gen 2 (10Gbps) External Enclosure, black The ICYNano MB861U31-1M2B USB 3.2 Gen 2 10Gb/s tool-less enclosure allows you to swiftly transform your M.2 NVMe PCIe SSD into a portable pocket drive. It is a unique external enclosure where you can swap any length M.2 drives within seconds by using the innovative tool-less M.2 adjustable locker. Utilizing the extra-long 22110 SSD for the intensive workflow with transfer speed up to 10Gb/s through USB 3.2 Gen 2 interface making the ICYNano a perfect tool for media professional editors, computer repair technicians, or daily on-the-go usage. Supports USB 3.2 Gen 2 Interface – up to 10 Gb/s transfer speed High-efficiency thermal pad included for optimal cooling performance Industry-leading 3-year warranty with complimentary tech support & customer service USB Type C to C and C to A cables included for best performance and system compatibility True plug and play design and backward compatible with USB 2.0, 3.0, 3.2 Gen 1 interfaces Dual-function aluminum heatsink lid provides maximum drive protection and heat dissipation Patent-Pending adjustable M.2 drive locker offers tool-less and screw-less drive installation process Fits 1x M.2 PCIe NVMe SSD of all length – 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110) Weight: 99 g Dimensions: (WxDxH) 150 x 63 x 12 mm

Varastossa

3 kpl

MB861U31-1M2B

ToughArmor M.2 NVMe SSD to PCIe 3.0 x4 Hot-Swap

ToughArmor M.2 NVMe SSD to PCIe 3.0 x4 Hot-Swap

ToughArmor M.2 NVMe SSD to PCIe 3.0 x4 Hot-Swap. ICY Dock ToughArmor MB840M2P-B - Storage controller - M.2 - 1 Channel - M.2 NVMe Card - 32 Gbit/s - PCIe 3.0 x4 - black, silver

Varastossa

2 kpl

MB840M2P-B

flexiDOCK MB524SP-B 4x2,5" SSD Dock, Trayless, Hot-Swap SATA, black

flexiDOCK MB524SP-B 4x2,5" SSD Dock, Trayless, Hot-Swap SATA

flexiDOCK MB524SP-B 4x2,5" SSD Dock, Trayless, Hot-Swap SATA, black flexiDOCK brings the quality and ease-of-use of a professional solution to the consumer market. With support for up to four 2.5" hard drives or SSDs, the MB524SP-B needs only a single 5.25" bay. Our new tray-less design has no doors, allowing for drives to be switched out in seconds. This is an improvement to many traditional hard drive docking stations that leave the drive sticking out and looking cluttered. The easy to press ejection button offers rapid drive ejection in a smooth, quick action. Individual power buttons for each bay allow drives to be turned on and off in an instant. The metal body with an air ventilating design works together with the adjustable 40mm fan to provide quiet operation while keeping your drives at optimal temperature. 40mm cooling fan Fan speed control Fits any external 5.25ö bay Full metal chassis with industrial ABS plastic Dimensions(BxDxH): 146 x 147 x 41 mm Weight: 558.3g

Varastossa

3 kpl

MB524SP-B

3x 2.5" to 1x 3.5" bay mobile rack SATA metal keylock black

3x 2.5" to 1x 3.5" bay mobile rack SATA metal keylock b

ICY DOCK ToughArmor MB993SK-B, 3.5" bay for 3x2.5" SATA/SAS HDD/SSD"s, black Fit up to three 2.5" SAS/SATA HDD&SSD"s with a maximum height of 7mm in one 3.5" drive bay. The MB993SK-B powers the HDD"s with the 4-pin floppy power connector on the back. Each HDD has it"s own 7-pin SATA connector on the back of the MB9993SK-B. To find out more about all of the features of this ToughArmor drive bay, watch the ICY DOCK youtube clip under information. SafeGuard lock on the front Fits 3x2.5" SAS/SATA HDD/SSD"s 4-pin floppy connector for power Each HDD has it"s own 7-pin SATA connector Dimensions(WxDxH): 102.1x133x25.4mm Weight: 370g

Varastossa

1 kpl

MB993SK-B

2.5" SATA SSD/HDD to PCIe 2.0 x 1 Hot-Swap Mobile Rack, Black

2.5" SATA SSD/HDD to PCIe 2.0 x 1 Hot-Swap Mobile Rack, Blac

ICY DOCK ToughArmor MB839SP-B, 2.5ö SATA SSD/HDD to PCIe 2.0 x1 Hot-Swap Mobile Rack for PCIe Expansion Slots, black Introducing the ToughArmor MB839SP-B rugged removable drive bay for 2.5ö SATA hard drives and SSDs (9.5mm height). Utilizing the standard PCIe 2.0 interface and taking only a single PCIe expansion slot, the MB839SP-B gives you an additional hot-swappable drive bay for hard disk drives (HDDs) and solid state drives (SSDs) even when your computer does not have an open SATA port or empty drive bay. Because the single PCIe port handles both power and data, there’s no additional clutter from SATA data and power cables. Fully supports hot-swapping drives with its removable drive tray. Compatible with Mac Pro 2008-2012 models with no driver required Fits 1x SATA hard drive or SSD from 7mm to 9.5mm in height Uses PCIe 2.0 x1 interface, also supports installation into PCIe 2.0 and PCIe 3.0 x1, x4, x8, and x16 slots Installs into single-width PCIe expansion slot PCIe interface provides both power and data transfer which ultimately reduce cable clutter Narrow design allows for multiple bays to be installed side-by-side in a modular design Includes full-height PCIe faceplate to protect against buildup of dust Strong hot-swap connector rated for a minimum of 10,000 insertion/removal cycles Eagle-hook lock system keeps the drive secure in the enclosure EMI Grounding – protects hard drives from electrical damage Anti-Vibration Technology (AVT) reduces noise and protects against environmental damage Active Power Technology (APT) saves power by shutting the device down when no drive is installed. Industry leading 3-year warranty against all defects Complimentary support from professionally trained US-based technical support agents Product Dimensions (WxHxD): 154x122x22mm

Varastossa

1 kpl

MB839SP-B

ToughArmor 4 Bay 2,5" SATA HDD & SSD Backplane-Modul aus Metall

ToughArmor 4 Bay 2,5" SATA HDD & SSD Backplane-Modul aus Met

ToughArmor 4 Bay 2,5" SATA HDD & SSD Backplane-Modul aus Metall. ToughArmor 4 Bay 2,5" SATA HDD & SSD Backplane-Modul, Metal, black

Varastossa

18 kpl

MB607SP-B

ICY DOCK, Sisäinenhot-swap, 4x3,5" SATA, 3x5,5" paikkaa, mu

ICY DOCK, Sisäinenhot-swap, 4x3,5" SATA, 3x5,5" paikkaa

ICY DOCK, Sisäinen kotelo, jossa hot-swap 4x3,5" SAS/SATA-kiintolevylle, 3x5,5"-paikkaa, lukittava, 1x120mm tuuletin, tuuletinohjain, musta

Ulkonäöltään massasta erottuva sisäinen kotelo, johon mahtuu neljä 3,5" SAS/SATA-kiintolevyä ja vie ainoastaan kolme 5,25"-paikkaa kotelossasi. Hot-swap kiintolevyt on helppo asentaa kasetteihin.

Hiljainen 120mm tuuletin, jossa on LED-valaistus voidaan säätää kolmeen eri tilaan: täysteho, alhaisempi nopeus (hiljaisempi) sekä pois päältä. Myös valaistuksen voi säätää kolmeen eri tilaan, kirkas, himmeämpi ja pois päältä. Kun tahdon vaihtaa tuulettimen, ruuvaat vain mukana tulleen irti ja asennat toivomasi 120mm kokoisen tuulettimen. Tuulettimen edessä on tuuletinfiltteri, joka voidaan irroittaa ja puhdistaa niin, että tuuletin pysyy puhtaana ja hiljaisena.

Mukana kotelon asennukseen tarvittavat ruuvit sekä käyttöohje.

Mitat(LxSxK): 145x126x229mm.
Paino: 1100g.

Varastossa

2 kpl

MB074SP-1B

ICY DOCK sisäinen kotelo 4x2,5" SATA kiintolevyille, 1x5,25"-paikkaan

ICY DOCK sisäinen kotelo 4x2,5" SATA kiintolevyille, 1x5,25&

ICY DOCK sisäinen kotelo 4x2,5" SATA kiintolevyille, SATA 6Gb/s, 1x5,25"-paikkaan, metallia, musta

2x40mm tuuletinta takana.
Virransyöttöön 2x4-pin Molex virtaliitosta.
Mukana ruuvit asennukseen.
Mitat (LxSxK): 171x149x42mm.

Varastossa

12 kpl

MB994SP-4SB-1

ToughArmor Externes 2,5" SATA HDD & SSD USB 3.0 Gehäuse

ToughArmor Externes 2,5" SATA HDD & SSD USB 3.0 Gehäuse

ICY DOCK ToughArmor MB991U3-1SV, 2.5" external SATA HDD/SSD USB 3.0 exlosure, black The MB991U3-1SB is an enterprise-grade portable enclosure that allows users to quickly access their 2.5ö SATA hard drives and SSDs through a single USB connection. The removable EZ-Slide Mini tray supports hot-swap and makes drive interchangeability completely hassle free. With the EZ-Slide Mini tray, users can swap multiple drives between trays, makes it an ideal enclosure for data backup, content archiving and data replication. For example, a video production company can use it for data archiving and then transport the SSD between locations. Small businesses can use it for critical data backup and store the drive in different location for offsite backup. Full metal construction for durability and drive protection. Removable EZ-Slide Mini tray supports hot-swap function. Supports 2.5ö SATA III hard drive / SSD with 5mm, 7mm, 9.5mm & 15mm height. USB 3.0 interface supports UASP Universal drive slot that is compatible with wide range of ToughArmor drive tray includes MB991, MB992, MB994, MB996 and MB998 series. Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure. Multi-Flow Technology (MFT) - provides excellent passive cooling. Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs. Active Power Technology – Device only power up if there are drive installed. USB 3.0 with UASP support and backward compatible with USB 2.0 interface. USB bus-powered, no power adapter is required. Removable tray system for easy maintenance. Compatible with wireless router / DVR / Smart TV / Android TV box via USB interface. Anti-slip rubber protective sleeves enhances enclosure stability and reduces shock impacts. Dimensions(WxDxH): 110x141.4x35.4mm Weight: 461g

Varastossa

1 kpl

MB991U3-1SB

ICY DOCK internt kotelo 2x2,5" SATA/SAS-kiintolevyille+ 1xSlimCD/DVD

ICY DOCK internt kotelo 2x2,5" SATA/SAS-kiintolevyille+ 1xSl

ICY DOCK sisäinen kotelo 2x2,5" SATA/SAS-kiintolevyille+ 1xSlimCD/DVD, tarvitsee 1x5,25"-paikan, metalli, musta

Sisäinen 5,25"-kotelo täysin alumiinia, paikka kahdelle 2,5" SATA tai SAS 6Gb/s kiintolevylle max. 15mm, sekä yhdelle Slim SATA CD/DVD-yksikölle.
Kaksi 4-pin Molex virtaliitintä. Yksi 40mm tuuletin takareunassa pitää levyt viileinä, mutta se voidaan laittaa pois päältä kun sitä ei tarvita.

Mitat (LxKxS): 146x149x42mm.

Varastossa

1 kpl

MB994IPO-3SB

ICY DOCK U.2 NVMe SSD Hot-Swap Mobile Rack for 3.5" Bay

ICY DOCK U.2 NVMe SSD Hot-Swap Mobile Rack for 3.5" Bay

Icy Dock ToughArmor 2.5ö U.2 NVMe SSD Mobile Rack for External 3.5ö Drive Bay, black The ToughArmor MB601VK-1B is our next-generation rugged 2.5ö U.2 hot-plug mobile rack, supporting ultra-high-speed 32Gbps data transfer with all U.2 NVMe SSDs, including those from Seagate, Samsung, Intel, HGST, Micron, and all other brands. Fits 1x 2.5ö U.2 NVMe SSD, up to 15mm in height Industry leading 3-year warranty against all defects Supports the full NVMe bandwidth specification of 32 Gbps Uses an U.2 port (SFF-8639) to connect, requires NVMe host EMI Grounding – protects hard drives from electrical damage Installs into any standard external 3.5ö device bay or floppy bay Complimentary support from professionally trained US-based technical support agents Dimensions: (WxDxH) 168.7 x 101.2 x 25.4 mm Weight: 441 g

Varastossa

2 kpl

MB601VK-1B

1x 2.5" to 1x 3.5" bay mobile rack NVMe U.2 metal keylock black

1x 2.5" to 1x 3.5" bay mobile rack NVMe U.2 metal keylo

ICY DOCK ToughArmor MB601VK-B, Mobile rack for 1x2.5" SSD/HDD, U.2 NVMe, black Built with the next generation U.2 interface, MB601VK-B offers up to 32Gb/s of bandwidth and supports 2.5ö U.2 NVMe SSD, SAS and SATA interface 2.5ö solid state drives or hard drives. The superior performance of MB601VK-B provides the maximum amount of transfer speed for the most data intensive tasks, such as real time large database transfers and refreshes, massive bulk data swaps from multiple networks, VMware providing virtual operating systems for mulitple computers, and large scale editing of large multimedia assets of virtual reality, video, music, and other graphics between multiple workstations. *Note: NVMe U.2 host is required to accept NVMe, SAS or SATA drives. Fits 1 x 2.5ö U.2 NVMe SSD or 2.5" SAS / SATA SSD / HDD (NVMe U.2 host is required to accept NVMe SSD, SAS or SATA SSD / HDD) Fits any external 3.5ö drive bay or floppy bay Supports NVMe 32Gb/s transfer rate Accommodates 2.5" SSD with 7mm, 9mm, 12.5mm & 15mm Height Active Power Technology (APT) - only powers up if there is drive installed in the drive bay Anti-Vibration Technology (AVT) - creates a safe environment for hard drives or SSDs EMI Grounding – protects hard drives from electrical damage Eagle-hook lock system & 2-segment safeguard key lock keeps drives secure within the enclosure Heavy Duty Full Metal construction, perfect for enterprise applications Drive tray is compatible with ToughArmor MB991SK-B, MB991IK-B, MB994SP-4S, MB994SP-4SB-1, MB994SK- 1B, MB994IPO-3SB and MB991U3-1SB *SAS / SATA SSD/ HDD only Dimensions(WxDxH): 101.2x161.2x25.4mm

Varastossa

3 kpl

MB601VK-B

ICY DOCK ToughArmor 4 x 2.5" SATA/SAS HDD/SSD Rack Key Lock

ICY DOCK ToughArmor 4 x 2.5" SATA/SAS HDD/SSD Rack Key Lock

ICY DOCK internt kabinett för 4x2,5" SSD/SATA-hårddiskar, SAS/SATA 6Gb/s, tar upp 1x5,25"-plats, låsbar, metall, svart

Smidigt kabinett som rymmer plats för fyra stycken 2,5" SSD/SATA hårddiskar i en enda 5,25"-plats. Kylningen sköts av två 40mm-fläktar på baksidan.

Varje hårddiskkassett har ett lås för dig som vill att hårddiskarna inte ska plockas ut av obehörig personal. Strömmatas med två 4-pin Molex strömkontakter. Skruvar för montering ingår.

Mått(BxDxH): 171x149x42mm.

Varastossa

15 kpl

MB994SK-1B

ICY DOCK M.2 PCIe NVMe SSD Hot-Swap Mobile Rack for 3.5" Bay

ICY DOCK M.2 PCIe NVMe SSD Hot-Swap Mobile Rack for 3.5" Bay

Icy DOCK ToughArmor M.2 PCIe NVMe SSD Mobile Rack for External 3.5ö Drive Bay, black The ToughArmor MB601M2K-1B is the world’s first rugged M.2 NVMe removable mobile rack, supporting ultra-high speed 32Gbps data transfer using M.2 PCIe NVMe SSDs of all lengths and brands, including Samsung, Western Digital, Intel, Crucial, Corsair, Adata, and all other brands 2-segment key lock for additional physical security Industry leading 3-year warranty against all defects Adjustable drive locker holds all length drives securely Uses a U.2 port (SFF-8639) to connect, requires NVMe host Supports the full NVMe bandwidth specification of 32 Gbps EMI Grounding – protects hard drives from electrical damage Installs into any standard external 3.5ö device bay or floppy bay Integrated heat sink and ample ventilation for excellent passive cooling Fits 1x M.2 NVMe SSD of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110) Dimensions: (WxDxH) 168.7 x 101.2 x 25.4mm Weight: 546 g

Varastossa

2 kpl

MB601M2K-1B

ICY DOCK ylimäär. kiintolevykasetti MB992- ja MB996-sarjoille, 1x2,5"

ICY DOCK ylimäär. kiintolevykasetti MB992- ja MB996-sarjoille, 1x

ICY DOCK ylimäär. kiintolevykasetti MB992- ja MB996-sarjoille, 1x2,5". ICY DOCK ylimääräinen kiintolevykasetti MB992- ja MB996-sarjoille, 6 Gbps, 1 x 2,5"

Ei varastossa

0 kpl Tilaustuote

MB992TRAY-B

ICY DOCK EZ-Slide Mini Tray, kiintolevykasetti tuotteelle MB994SK-1B

ICY DOCK EZ-Slide Mini Tray, kiintolevykasetti tuotteelle MB994SK

ICY DOCK EZ-Slide Mini Tray MB994TK-B, kiintolevykasetti tuotteelle MB994SK-1B, 1 paikka 2,5" SATA- tai SSD-levylle, musta/hopea Kiintolevykasetti, joka sopii yhteen DAS-laite MB994SK-1B:n kanssa. Kasettiin on mahdollista asentaa 2,5 tuuman SSD- tai SATA-levy, jonka korkeus on enintään 15 mm. 1 paikka 2,5" kiintolevylle Kiintolevyn maksimikorkeus: 15 mm Mitat (LxSxK): 71,9 x 117,44 x 17,5 mm Paino: 131 g

Ei varastossa

0 kpl Tilaustuote

MB994TK-B

2.5" to 3.5" Adapter/Converter SATA black

ICY DOCK 2.5" to 3.5" Adapter/Converter SATA black

2.5" to 3.5" Adapter/Converter SATA black. MB882SP-1S-1B 2.5" to 3.5" Adapter/Converter SATA blackICY DOCK

Ei varastossa

0 kpl 27.11.2020

MB882SP-1S-1B

ICY DOCK (2 pieces MB882SP-1S-3B in one pack)

ICY DOCK (2 pieces MB882SP-1S-3B in one pack)

ICY DOCK EZConvert Lite MB882SP-1S-3B, Light Weight Open Air 2.5ö to 3.5ö SAS/SATA (22pin) HDD & SSD Converter/Mounting Kit for 3.5" Drive Bay, black The MB882SP-1S-3B was designed with attention to detail. It begins with the overall structure built from ABS plastic –a lightweight yet tough component. Fortifying this structure is the one piece construction which means, with the exception of the drive cover, there are no moving parts (moving parts increases the odds of components breaking). Optional screw holes built around the converter make it possible to mount your MB882SP-1S-3B in numerous positions if you have a finicky chassis. Mount this converter from the side or the bottom depending on your needs. Featuring EZ-Fit design for anti-shock and the best drive fit Open air design with all around airflow vents for maximum air flow Completely tool-less drive installation for quick & easy setup Converts your 2.5ö SATA HDD or SSD into an exact 3.5ö SATA hard drive form factor Supports 2.5ö SAS HDD/SSD with single channel SAS functions (requires SAS host) Supports SATA 6Gbps or SAS single channel Universal mounting holes for most common PC case Optional screw hole for extra drive security Simple and Lightweight design Perfect for anyone looking to add a 2.5ö SATA HDD/SSD to their system Crafted from durable ABS plastic with one piece construction Supports 2.5" SATA/SAS HDD/SSD of all heights from 7mm to 15mm Supports SATA and SATA power cables with locking latch design

Ei varastossa

0 kpl

MB882SP-1S-3B-DUAL

2x 2.5" SATA/SAS + 1x 3.5" in 1x 5.25" bay mobile rack screwless trays

2x 2.5" SATA/SAS + 1x 3.5" in 1x 5.25" bay mobile

ICY DOCK ExpressCage MB322SP-B, fit 2x2.5" and 1x3.5" HDD/SSD in one 5.25"-slot, black If you’re seeking a compact rack with versatility and functionality, we have a convenient enclosure just for you. The ExpressCage MB322SP-B is a mobile rack that converts a external 5.25ö device bay to fit two 2.5ö SATA/SAS HDD/SSD (7mm-9.5mm), and includes a 3.5ö slot for either a hard drive or a 3.5ö device. With the unique tool-less drive installation design, the ExpressTray Mini allows you to install your 2.5ö SATA or SAS HDD/SSD just as quick and simple as a tray-less system while the optional bottom tray screw holes provide added stability. The MB322SP-B has a detachable dust cover which keeps the front panel enclosed to block out dust particles when the 3.5ö slot is left unused or when there’s a 3.5ö HDD installed. Soft blue LED indicator lights on each 2.5ö drive bay notify you when drives are being used without being too distracting. For maximum durability we have implemented enhanced door latches and a solid metal housing. Not your typical 5.25ö mobile rack, the ExpressCage MB322SP-B *takes two 2.5ö SATA/SAS HDD/SSD of 7mm to 9.5mm height and converts them into two hot-swap drive bays. It also includes 3.5ö slot for a 3.5ö device or 3.5ö hard drive for various build options. Host Interface :2 x 7pin SATA Drive Fit : 1 x 3.5" device or 1 x 3.5" hard drive 2 x 2.5" SATA or SAS (single channel) HDD/SSD Compatible 2.5" Drive Heights: 7mm, 9.5mm Device Fit: Single external 5.25" half height device bay Transfer Rate : Up to 6 Gb/sec. (depending on hard drive speed) Power Input: Single 15pin SATA power port Insert& Extract connection Via: Direct SAS/ SATA hard drive connection Structure: Plastic and metal Power Indicator: Solid blue LED HDD Access Indicator: Blinking blue LED Dimensions(WxDxH): 145.8x151.1x41.3mm Weight: 346.3g

Ei varastossa

0 kpl 27.11.2020

MB322SP-B

ICY DOCK flexiDock 1x2.5"+1x 3.5"SATA>1x5.25" mobile rack tray/fanless

ICY DOCK flexiDock 1x2.5"+1x 3.5"SATA>1x5.25" mobi

ICY DOCK flexiDOCK MB795SP-B Tray-less 2.5" and 3.5" SATA SSD/HDD Docking Enclosure for External 5.25" Drive Bay, black Compatible with any standard 5.25" External bay Fits 1x 3.5" SATA HDD and 1x 2.5" SATA HDD/SSD (up to 9.5mm height while 3.5" drive is in use) Dual-purpose drive guiding mechanism & stabilizer Tray-less, screw-less, door-less drive installation Retractable dust cover to protect the internal connectors from dust buildups

Ei varastossa

0 kpl 27.11.2020

MB795SP-B

ICY DOCK DuoSwap, Intern dockningsstation för 3,5" och 2,5"-HDD, svar

ICY DOCK DuoSwap, Intern dockningsstation för 3,5" och 2,5&q

ICY DOCK DuoSwap - Intern dockningsstation för 3,5" och 2,5" SATA-hårddiskar, svart

Riktigt trevlig dockningsstation för 3,5" och 2,5" hårddiskar. ICY DOCK DuoSwap installeras i en ledig 5,25"-plats och har plats för en 3,5" SATA-hårddisk och en 2,5" SATA-hårddisk/SSD-enhet samtidigt. Hårddiskarna kan matas ut individuellt och strömförsörjas tack vare de individuella ejekt- och strömknapparna.

Intern dockningsstation för två hårddiskar.
Individuell ström och ejekt-knapp.
SATA 6 Gb/s.
Hot-swap.

Maxhöjd på 2,5ö-enheten kan ej överstiga 9,5mm vid användning av båda facken (2,5" + 3,5").

DuoSwap, skruv och användarmanual ingår i förpackningen.

Mått(BxDxH): 147,8x178,2x42mm.

Ei varastossa

0 kpl Tilaustuote

MB971SP-B

ICY DOCK sisäinen kasetti 4x2,5" SAS/SATA 1x5,25"-paikkaan, 6Gb/s

ICY DOCK sisäinen kasetti 4x2,5" SAS/SATA 1x5,25"-paikk

ICY DOCK sisäinen kotelo 4x2,5" SAS/SATA kiintolevyille 1x5,25"-paikkaan, 6Gb/s, lukittava, metallia, musta

2x40mm tuuletinta takana.
Virransyöttöön 2x 4-pin Molex virtaliitosta.
Mukana ruuvit asennukseen.
Mitat (LxSxK): 171x149x42mm.

Ei varastossa

0 kpl Tilaustuote

MB994SP-4S

ICY DOCK kiintolevykasetti 6kpl 2,5"-levylle,1x5,25"-paikka,SATA 6Gb/s

ICY DOCK kiintolevykasetti 6kpl 2,5"-levylle,1x5,25"-pa

ICY DOCK kiintolevykasetti 6x2,5"-kiintolevylle, 1x5,25"-paikka, SATA 6Gb/s, alumiiniraami, musta

Internt 5,25"-kotelo, täysin alumiinia, paikat 6x2,5" SATA 6Gb/s kovalevyille max 9,5mm.
Kaksi 4-pin Molex virtaliitintä. Yksi 40mm tuuletin takareunassa pitää levyt viileinä, mutta se voidaan laittaa pois päältä kun sitä ei tarvita.

Mitat (LxKxS): 146x149x42mm.

Ei varastossa

0 kpl Tilaustuote

MB996SP-6SB

ICY DOCK ToughArmor 8x2.5öSATA/SSD/ 1x5.25ö paikka, musta

ICY DOCK ToughArmor 8x2.5öSATA/SSD/ 1x5.25ö paikka, musta

ICY DOCK Tough Armor, sisäinen kotelo, johon mahtuu 8x2.5" SATA/SSD kovalevyä 1x5.25" paikka, musta Kaikki laitteen eivät ole luotu samanlaisiksi, ja tästä osoituksena on Tough Armor M99SP-B. Sen avulla voit hallita kahdeksaa 2,5" kovalevyä, jotka ovat 7mm korkeita ainoastaan yhdellä 5,25"-paikalla. ICY DOCKs hot-swap EZ Slide Nano-kasetit antavat sinulle kivuttoman vaihtoehdon vaihtaa nopeasti kovalevyjä. 40mm kaksoistuulettimet pitävät kovalevyt viileinä. MB998SP-B on valmistettu korkealaatuisesta metallista ja se on markkinointimielessä suunniteltu Lääke-/Armeijajärjestelmille, IPC, yritys- ja teollisiin ympäristöihin. Maksimikorkeus kovalevylle: 7mm 40mm kaksoistuulettimet

Ei varastossa

0 kpl Tilaustuote

MB998SP-B

Sivut:

1