Testerit

DeLOCK Micro USB -sovitin, ilmaisee jännitteen ja virtamäärän, korkeintaan 4 A, musta

Micro USB -sovitin, joka kytketään virtasovittimen ja esim. mobiililaitteen väliin. Sovittimessa on LED-merkkivalo, joka näyttää kulloisenkin jännitteen ja virtamäärän.

• Korkeintaan  4 A
• Soveltuu 5 V tasavirralle (ilmaisee korkeintaan 6 V jännitteen)
• Näytöllä näkyy vuorotellen voltti- tai ampeerimäärä

DeLOCK PoE-testityökalu, 802.3af/at, Mode A/B, musta/keltainen

Tällä DeLOCKin PoE-testityökalulla on näppärää testata, miten Ethernet-kaapelia käyttävä virtalähde toimii. LED-merkkivalot ilmaisevat, onko käytössä A- vai B-tila ja onko virta 802.3af- vai 802.3at-standardin mukaista.

• Ei tarvitse akkua
• LED-merkkivalo, joka ilmaisee, onko käytössä A- vai B-tila (johtoparit 12/36 tai 45/78)
• LED-merkkivalo, joka ilmaisee, onko käytössä 802.3af- vai 802.3at-standardi

DELOCK USB Type-C PD Adapter, OLED display for Voltage and Ampere, silver

This USB-C PD (Power Delivery) adapter with OLED display by Delock is used to read the amperage and voltage during charging process or when transmitting data. The adapter works in both directions, so that the power source can be connected to the USB Type-C male port as well as to the USB Type-C female port. The OLED display shows the current ampere and voltage of the connected device. An additional arrow indicates the direction of the power flow.

• Connectors: 1 x USB Type-C male, 1 x USB Type-C Power Delivery female
• Double row OLED display
• Supports charging function and data transfer in both directions
• Voltage and ampere indication at the same time
• Data transfer rate up to SuperSpeed USB 5 Gbps
• For direct voltage up to 20 V
• Ampere indication up to 3.4 A

Dimensions(BxDxH): 20 x 62 x 8 mm

Delock HDMI tester for EDID information with OLED-display, 3840x2160 60Hz, black

This HDMI tester with OLED display by Delock is used to read the EDID data stored in the monitor. The OLED display shows the maximum resolution, the refresh rate, the HDCP status and the color depth of the connected device.

Specification
• Connectors:
  1 x HDMI-A 19 pin male
  1 x USB Type Micro-B female (5 V power supply)
• Resolution up to 3840 x 2160 at 60 Hz (depending on the system and the connected
  hardware)
• Double row OLED display
• Plastic housing
• Colour: black
• Dimensions incl. connector (LxWxH): ca. 70.5 x 22.0 x 11.0 mm

System requirements
• Power source with a free USB Type-A female port

Package content
• HDMI EDID Tester
• USB Type-A to Type Micro-B cable, length ca. 80 cm
• HDMI extension cable, length ca. 22 cm
• HDMI coupler
• User manual

Package
• Retail Box

FLIR VP52, contactless voltage detector, 190-1000V, 24-1000V, 45-56Hz, black

FLIR VP52 is a robust, CAT IV-rated non-contact voltage detector with a combination of indications - vibration and red LED alarm, a powerful LED torch and various voltage sensitivities. We have developed FLIR VP52 for reliable detection of voltage on new vandal-proof sockets and electrical systems installed in accordance with modern methods.

The VP52 has been designed for long life and has been tested for up to 3 meters and will last for years to come. The VP52 can be used to reliably detect voltage in modern household safe electrical outlets, electrical systems in large industrial plants, low voltage installations in homes or systems located behind obstacles. The low profile probe tip causes the detector to come closer to the live parts.

Technical Overview:
• Voltage range: 190 to 1000 V, 24 to 1000 V
• Detection distance: 0 to 5 cm
• Category label: CAT IV-1000 V
• Frequency range: 45-65 Hz
• Built-in work lamp: Yes
• Vibration indication: Yes
• Power switch: Yes
• Battery time: 7 hours with LED turned off
• Battery: 2x AAA batteries
• Certifications: UL

Dimensions (WxDxH): 29x156x26mm
Weight: 200g

Package contents: VP52, 2x AAA batteries, user manual

elock DisplayPort tester for EDID information with OLED-display, 3840x2160 60Hz, black

This DisplayPort tester with OLED display by Delock is used to read the EDID data stored in the monitor. The OLED display shows the maximum resolution, the refresh rate, the HDCP status, the transmission rate and the color depth of the connected device.

Note
The tester is powered by the graphics card. The included 20 pin Displayport cable can be used for extension.

Specification
• Connectors:
  1 x DisplayPort 20 pin male >
  1 x DisplayPort 20 pin female
• Resolution up to 3840 x 2160 at 60 Hz (depending on the system and
  the connected hardware)
• Signal routed to the output (pass-through)
• Double row OLED display
• Plastic housing
• Colour: black
• Dimensions incl. connector (LxWxH): ca. 72.5 x 22.0 x 11.0 mm

System requirements
• A free DisplayPort female

Package content
• DisplayPort EDID Tester
• DisplayPort extension cable, length ca. 35 cm
• User manual

Package
• Retail Box

RS Pro RS-960 Handheld Digital Multimeter, 10A ac/dc, 600V, red/black

RS-960 true RMS compact digital multimeter with double molded plastic housing and over sized high contrast 4000 counts LCD display.

• Multimeter Type: Handheld
• Absolute Maximum DC Current Measurement: 10A dc
• Absolute Maximum AC Current Measurement: 10A ac
• Absolute Maximum AC Voltage Measurement: 600V ac
• Absolute Maximum Resistance Measurement: 40MO
• Absolute Maximum DC Voltage Measurement: 600V dc
• Absolute Maximum Capacitance Measurement: 4mF
• Absolute Maximum Temperature Measurement: +760 °C, +1400 °F
• Functions Measured: AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance, Temperature
• True RMS: Yes
• Maximum Frequency: 10kHz
• Display Type: LCD
• DC Voltage Measurement Resolution: 1V
• Best DC Current Accuracy: ±1 %
• Best AC Voltage Accuracy: ±1 %
• Best Capacitance Measurement Accuracy: ±3 %
• Best Resistance Measurement Accuracy: ±1.5 %
• Best Temperature Measurement Accuracy: ±3 %
• Battery Type: AAA
• Safety Category Level: CAT III
• Best DC Voltage Accuracy: ±0.5 %
• Best AC Current Accuracy: ±2 %
• Safety Category Voltage: 600V

Dimensions: 70x45x135mm
Weight 255g

FLIR MR40, moisture pen + flashlight, 5% - 60% moisture content, IP54, black

The FLIR MR40 is a pocket-portable, rugged 2-pin, single-scale moisture meter with an integrated flashlight for wood and common building materials – ideal for builders, building inspectors, remodelers, moisture remediation technicians, pest control professionals, and residential roofing and flooring contractors. Providing reliable and accurate measurements offered at a highly affordable price point, MR40 is a quick and easy-to-use tool to find and quantify moisture content.

When used in combination with a thermal camera, MR40 can help confirm whether a cold spot in a thermal image is moisture, and measure the severity of the problem.

Equipped with a clear LCD display, a simple On/Off button with "Auto Power Off", replaceable pins, and an audible indication of measured range, the MR40 is a simple and effective tool for reliable measurements.

The MR40 is small enough to carry in your pocket, IP54 splash-proof rated, and 3-meter drop tested, so it"s always ready to work when — and wherever— you are.

The MR40 has all the essential features you need to quickly verify moisture and determine the severity of the problem including a measurement "hold" function and calibration/pin check integrated in the cap.

The pen uses 2x AAA batteries and they are included.

Dimensions(WxDxH): 26x193x31mm
Weight: 80g