Mediamuuntimet ja Transceiverit

MikroTik ACSMAUFL U.FL to SMA cable for wAP R, LTE card to external antenna, black

U.FL to SMA female cable, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables)

• U.FL to SMA cable
• Compatible with most antenna
• Designed for internal LTE cards

MikroTik Flex-guide Low loss RPSMA cable, 50cm, silver plated, blue

A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.

The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.

• Up to 6 GHz
• 50cm cable length
• Soldered connectors
• Indoor and outdoor use
• Compatible with most antennas
• Silver plated copper conductor
• Matching above -20 dB and less than 0.65 dB signal loss

MikroTik S-85DLC05D SFP-moduuli, kaksi LC-liitintä, 550 m, 1,25G, DDM, hopea

SFP-moduuli, joka tarjoaa kaksi LC-liitintä. Se soveltuu monimuotokuidulle, jonka pituus on korkeintaan 550 metriä.

• Aallonpituus 850 nm
• Siirtoväli korkeintaan 550 m
• Kaksi LC UPC -liitintä
• Siirtonopeus jopa 1,25 Gbps

DELTACO SFP 1000Base-SX, LC, 850nm, 550m, Multi-Mode (Vastaa tuotetta HP J4858C)

• Vastaa tuotetta HP J4858C

MikroTik S+DA0001 SFP+ Direct attatch cable, 1m, SFP/SFP+, black

This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.

• SFP+ to SFP+
• 1m cable length
• Speeds up to 10 Gbps

MikroTik S-RJ01 Gigabit RJ45 SFP module, 100m, 1.25 Gbps, silver

S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices.

• Up to 100m
• Speeds up to 1.25 Gbps
• SFP to 10/100/1000 RJ45

Ubiquiti UFiber Active Ethernet, Media converter fiber to copper, 24V Passive PoE/802.3af compatible, black

UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFiber SFP Modules (power supply and SFP modules not included).

MikroTik RBFTC11 SFP to RJ45 converter, fiber to copper, PoE, waterproof, white

The FTC is a simple Fiber to Copper converter. Unlike many other media converters available on market, it has outdoor waterproof case with lock screw, it"s mounting bracket can be attached and locked with a screw from inside the case. Unit has 12-57V PoE with 802.3af/at support (with unshielded cross cable). Comes with PoE injector and power supply. Works only with Gigabit SFP connections.

• 1x SFP slot
• 1x 10/100/1000 RJ45 Ethernet port
• Waterproof, ready for outdoor use
• Only compatible with gigabit SFP modules
• Powered via 12-57V Passive PoE (adapter included)

MikroTik S+DA0003 SFP+ Direct attatch cable, 3m, SFP/SFP+, black

This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.

• SFP+ to SFP+
• 3m cable length
• Speeds up to 10 Gbps