Tuoteluettelo
Tuotealueet
Tuoteluettelo
Toimitukset Matkahuollon kautta
Toimitukset Postin kautta

LNB lukupäät satelliittiantenneille

Tarjous
Satelliitti - mastovahvistin 20 db 47-862 mhz
Satelliitti - mastovahvistin 20 db 47-862 mhz
The most important quality is that this amplifier works with Plug & Play. Everything works without configuration.
PicoKom apartment amplifier is the industry's first intelligent home amplifier. The technology always ensures
that you get the optimum gain and output.

The amplifier is powered by a built-in switch mode which is Televes contribution to our environment and future.
No other amplifier with corresponding functions can be displayed on lower power consumption.

During a shielded HF-tight lid you will find dual connectors Easy-F type. The low-noise amplifier stages are on
the whole 20dB. For the power supply of Televes antennas with BOSS technology, turn to a small switch on the back
and increases gain by an additional 13 dB
7 kpl
F2335605
30,90 €
Yleismallinen lnb kaksois 0.2 db
Yleismallinen lnb kaksois 0.2 db
The LNB allows for the connection of maximum 4 (Unicable enabled) Set Top Boxes with Single Tuner via two cables (or of maximum four STBs via one cable).
Main Features:
• Low Phase Noise, HDTV-DVBS2 compliant
• Low Noise FigureLow Power Consumption
• Very high Cross Polarization Isolation
• Very high Frequency Stability
• 2 Legacy Ports

Technical data:
• Low Band Input Frequency Range 10.7~11.7 GHz
• LO Frequency 9.75 GHz
• High Band Input Frequency Range 11.7~12.75 GHz
• LO Frequency 10.6 C+Hz
• LO Initial Accuracy +/- 1.0 MHz
• LO Temperature Drift +/- 2.5 MHz
• LO Phase Noise @ 10K Hz -90 dBc/Hz max.
• SCR Conversion Gain 57 dB min.
• Legacy Conversion Gain 55 dB Min.
• Gain Variation +/- 0.75 dB/ 27 MHz
• Image Rejection 40 dB min.
• 1 dB Compression Point (O/P) 0.0 dBm min.
• Cross-pole Isolation 20 dB Min.
• O/P VSWR 2.5 : 1
• Output Impedance 75O (F-type)
• IF Channel bandwidth 60 MHz
• Output IF Channel 1 (SCR0) 1210 MHz
• Output IF Channel 2 (SCR1) 1420 MHz
• Output IF Channel 3 (SCR2) 1680 MHz
• Output IF Channel 4 (SCR3) 2040 MHz
• Channel isolation 20 dB Min.
• Legacy ports 2
• SCR's Control Signals DiSEqC command extension based on EN-50494
• Legacy Switch Voltage Control <14.2 (V) , >15 (H) Volts
• Legacy 22k sensitivity 220 mV [min.]
• DC Power 250mA@13.5V
• Working Temperature - 30°C~ + 60°C
• Weight 350g
8 kpl
F6536220
79,90 €