Kovalevytelakka

Kiintolevytelakka usb 3.0 sata yksi paikka ja virtasovitin

Tällä Nedis®-kiintolevytelakalla yhdistät kiintolevysi heti pakkauksesta poistamisen jälkeen.
Telakointiasema soveltuu 2,5 tai 3,5 tuuman kiintolevylle tai SSD-laitteelle. Sen alumiinirunko ja muovikehys (päällys ja pohja) haihduttavat tehokkaasti lämpöä ja kestävät käytössä pitkään.
SATA III -liitin on taaksepäin yhteensopiva vanhojen SATA I ja II -laitteistojen kanssa. USB 3.0 -liitännällä lataat suurimmatkin tiedostot 5 Gbps:n nopeudella.

Kiintolevykotelo 2,5 ja 3,5 tuuman SATA-kiintolevyille tai SSD-laitteille

Taaksepäin yhteensopiva SATA III -liitäntä

USB 3.0 -liitännän tiedonsiirtonopeus on jopa 5 Gbps

Tallennustilaa jopa 8 Tt

Tyylikäs, virtaviivainen alumiinikotelo haihduttaa lämpöä tehokkaasti

HDDUSB3200BK

24,40 €

Suosittu

DELTACO USB 3.0 telakka-asema, kloonaus, 2x2,5/3,5" SATA, m

DELTACO telakka-asema kahdelle 2,5" tai 3,5" SATA kiintolevylle, SATA 6Gb/s, USB 3.0, musta

Mahdollistaa kahden 2,5" tai 3,5" SATA-kiintolevyn liittämisen tietokoneesesi. Voit kloonata levyn yksinkertaisella napinpainalluksella ilman telakka-aseman kytkemistä tietokoneeseen.

Note! Please have in mind that the target drive, the hard drive where the data is supposed to be cloned to must be equally or with a bigger volume than that of the source drive.

- Nopea pääsy kiintolevyihisi.
- LED valo ilmoittaa kiintolevyn statuksen
- USB 3.0 tarjoaa maksimaalisen nopeuden
- Plug n Play, ei vaadi ajureita tai ylimääräisiä asennuksia
- Yhteensopivuus: Windows XP, Vista, 7, 8 ja Mac OS X
- Käsittelee 2,5" kiintolevyjä, jotka ovat kapasiteetiltaan enintään 1TB ja 3,5" kiintolevyjä, jotka ovat enintään 4TB.

Mitat (LxSxK) 120x120x85mm

15.04.2020

MAP-GD35U3

36,60 €

ICY DOCK EZConvert M.2 NVMe > 2.5" U.2 NVMe SSD Converter to

ICY DOCK EZConvert MB705M2P-B, M.2 PCIe NVMe SSD to 2.5" U.2 PCIe SSD Converter Adapter, blacl

Because M.2 SSDs are not designed to be hot-swapped, their connectors are very delicate, typically rated for only 250 insertion/removal cycles. When used with the EZConvert MB705M2P-B, M.2 PCIe NVMe SSDs can be hot-swapped without putting any wear on the internal connector, instead using ICY DOCK€™s strong hot-swap connector rated for 10,000 insertion/removal cycles. Hot-swap makes it easy to add, remove, and replace drives without the need to restart the system.

- Convert your M.2 NVMe SSD into the 2.5€ U.2 NVMe form factor with 9.5mm height)
- Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
- Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
- Enables hot-swap functionality for any M.2 PCIe NVMe SSD
- Hot-Swap Ready 10,000 insertion/removal cycle rated connector
- Supports full Nvme bandwidth specification of 32Gbps
- 100% tool-less and screw-less M.2 drive installation
- Dual-function aluminum heat sink and lid for optimal protection and cooling performance
- Lower housing ventilation hole can pop out for additional air flow and improved cooling
- Strong 1-piece ABS plastic lower body
- Supports U.2 (SFF-8639) cables
- Fits into any U.2 backplane, hot-swap bay, or 2.5-inch mounting bracket
- Industry leading 3 year warranty with exceptional customer support
- Complimentary technical support from trained US-based ICY DOCK support technicians

Dimensions(WxDxH): 70x101.1x9.5mm
Vikt: 67g

MB705M2P-B

41,20 €

Kovalevytelakka 2 x 2,5" SATA HDD tai SSD

ICY BOX IB-2502CL-U3, 2-bay docking and clonestation for 2.5" SATA/SSD, black

Six colored LEDs inform the user about the status of the cloning operation, and the hard drives at any time. If nothing is being cloned, the USB 3.0 Standard can reach transfer rates of up to 5 Gbit/s. The hard drives are detected and displayed independently.

The IB-2502CL-U3 offers space for two 2.5" hard drives or SSDs and holds them in place with a spring mechanism for maximum stability. You can write or read them at the same time which can save a significant amount of time. The hard disk capacity is unlimited.

Connecting a lot of different SSDs to your devices is a good reason to use this double docking station. It can hold two 2.5" SATA HDDs and SSDs. The 2.5" HDDs might have a height of 12.5 mm, even 15 mm. The springs will hold your storage medium safely in place. USB 3.0 and UASP Support accelerate the transfer of huge data, e.g. of movies, enormously.

- Bootable SSD/HDD cloning without PC (stand alone)
- HDD/SSD Docking and CloneStation with integrated USB cable (50 cm length)
- Supports 2.5" SATA HDD/SSD, capacity unlimited
- Supports SATA III, 6 Gbit/s
- USB 3.0 host interface with up to 5 Gbit/s and UASP
- LED for power and HDD/SSD access
- Plug & Play and HotSwap

Dimensions(WxDxH): 93x87x45mm
Weight: 150g

IB-2502CL-U3

41,80 €

External Type-Cä¢ aluminium enclosure for M.2 NVMe SSD

Icy Box External Type-C aluminium enclosure for M.2 NVMe SSD, silver

Fast and mobile
With the help of the external USB 3.1 Type-Cä¢ enclosure IB-1817M-C31 you can comfortably take one NVMe card with you wherever you go and keep it accessible. It allows access to M.2 SSDs of up to 2 TB with any host computer.

Time is valuable
The IB-1817M-C31 is compatible with M.2 cards of 30, 42, 60 and 80 mm length, operating system-independent and suitable for a variety of applications such as high-speed storage, cloning a drive or running a mobile operating system. All this happens with a data transfer rate with up to 1000 Mb per second. Compared to data transfer with a SATA drive, a data volume of 50 gigabytes is now transferred in 50 seconds instead of 1:36 minutes.

Package contents: 1x IB-1817M-C31 (drive not included), 1x Type-Cä¢ to Type-Cä¢ cable (20 cm), 1x Type-Cä¢ to Type-A cable (20 cm), 1x Silicon thermal pad, 1x Heat sink, 1x Tool for write protection switch, 1x Screw driver, 1x Set of screws, 1x Quick installation guide

Dimensions: (WxDxH) 105x40x15 mm

Weight: 100 g

IB-1817M-C31

61,30 €

External Type-Cä¢ enclosure for M.2, NVMe SSD

Icy Box External Type-C enclosure for M.2 NVMe SSD, silver

Fast and mobile
With the help of the external USB 3.1 Type-C enclosure IB-1817Ma-C31 you can take one NVMe card with you quickly and easily. It allows access to M.2 SSDs of up to 2 TB no matter to which host you connect it.

Your time is valuable.
The IB-1817Ma-C31 is compatible with M.2 cards of 30, 42, 60 and 80 mm length, operating system-independent and suitable for a variety of applications such as high-speed storage, cloning a drive or running a mobile operating system. All this happens with a data transfer rate with up to 1000 MB per second. Compared to data transfer with a SATA drive, a data volume of 50 gigabytes is now transferred in 50 seconds instead of 1:36 minutes.

Package contents: 1x IB-1817Ma-C31 (drive not included), 1x Type-C to Type-C cable (20 cm), 1x Type-C to Type-A cable (20 cm), 1x Silicon thermal pad, 1x Heat sink, 1x Tool for write protection switch, 1x Screw driver, 1x Set of screws, 1x Quick installation guide.

Dimensions: (WxDxH) 105x40x15 mm

Weight: 100 g

IB-1817MA-C31

63,90 €

ICY DOCK DuoSwap, Intern dockningsstation för 3,5" och 2,5"-HDD, svar

ICY DOCK DuoSwap, Intern dockningsstation för 3,5" och 2,5&q

ICY DOCK DuoSwap - Intern dockningsstation för 3,5" och 2,5" SATA-harddiskar, svart

Riktigt trevlig dockningsstation för 3,5" och 2,5" harddiskar. ICY DOCK DuoSwap installeras i en ledig 5,25"-plats och har plats för en 3,5" SATA-harddisk och en 2,5" SATA-harddisk/SSD-enhet samtidigt. Harddiskarna kan matas ut individuellt och strömförsörjas tack vare de individuella ejekt- och strömknapparna.

- Intern dockningsstation för tva harddiskar.
- Individuell ström och ejekt-knapp.
- SATA 6 Gb/s.
- Hot-swap.

Maxhöjd pa 2,5€-enheten kan ej överstiga 9,5mm vid användning av bada facken (2,5" + 3,5").

DuoSwap, skruv och användarmanual ingar i förpackningen.

Matt(BxDxH): 147,8x178,2x42mm.

Ei tiedossa

MB971SP-B

70,50 €

2 bay docking and clonestation for 2.5"/3.5" SATA/SSD,

ICY BOX IB-123CL-U3, 2 bay docking and clonestation for 2.5"/3.5" SATA/SSD, USB 3.0, black

2bay docking- and clone station for 2.5" and 3.5" SATA HDDs/SSDs with JBOD function and USB 3.0, UASP & SATA III Support. A cabinet full with HDDs to work with is a good reason to use this double docking station. It is for 2.5" as well as for 3.5" SATA HDDs. The plastic casing provides firm standing and is good looking. The 2.5" HDDs might have a height of 9.5 or 12.5 mm, even 15 mm. Due to its power supply, the dock also runs HDDs, which need to be provided with 12 V. USB 3.0 and UASP Support accelerate the transfer of huge data, e.g. of movies, enormously.

- HDD capacity: Unlimited
- Hot Swap: Yes
- Plug & Play:Yes
- External data interface: 1xUSB 3.0 with UASP Support
- Operating systems supported: Windows, Mac, Linux
- Transfer rate: USB 3.0 up to 5 Gbit/s
- Power switch: Yes
- LED: Power, access and clone progress
- Power supply: AC: 100 - 240 V / 50-60 Hz/1,0 A,DC: 30 V / 3,5 A

Dimensions(WxDxH): 140x125x54mm
Weight: 253g

IB-123CL-U3

72,00 €

Kovalevytelakka 2,5" ja 3,5" SATA HDD / SSD , USB 3.1 (

ICY BOX IB-117-U31, docking station for 1x 2.5"/3.5" HDD, USB-C 3.1 Gen 2, black

The USB interface has been the standard for PC hardware and the new USB 3.1 standard entails several improvements. Not only the data transfer rates are much faster but also the charging of smart devices. And finally, the reversible-plug connector is introduced to USB as well. Compared to USB 3.0 the transfer rates are doubled, thus the USB 3.1 interface achieves speeds of up to 10 Gbit/s which makes the interface fast enough to even max out current SSDs. Another novelty, the reversible-plug USB Type-C connector, can be plugged into an appropriate USB Type-C connector.

This docking station provides enough space for a SATA III hard drive/SSD with the form factor of 2.5" or 3.5". Using the new USB 3.1 Type-C port new speed heights can be achieved and the connection is easier than ever, since the Type-C connector is reversible.

The IB-117-U31 presents itself in noble matt black design of a combination of high-quality aluminum and plastic. A real visual treat in practical pen pocket format.

- Supports both 2.5" and 3.5" SATA HDD/SSD, capacity unlimited
- Support SATA III, 6 Gbit/s
- USB 3.1 (Gen 2) Host Interface up 10 Gbit/s with UASP
- LED for power, HDD access
- Supports Windows & Mac
- Plug & Play

Dimensions(WxDxH): 130x72x55mm
Weight: 348g

IB-117-U31

85,80 €

ICY BOX IB- Telakointi- ja kloonausasema, 2x2,5/3,5 SATA, JBOD, h

ICY BOX IB-121CL-6G - Telakointi- ja kloonausasema, jossa paikat kahdelle 2,5/3,5" SATA-kovalevylle, JBOD, alumiinia, hopea

Jos sinulla on kaapissa makaamassa kasa vanhoja kovalevyjä, tulet arvostamaan tätä telakointi- ja kloonausasemaa, jossa on paikat kahdelle kovalevylle. Voit käyttää 2,5" kovalevyjä, jotka ovat 15mm paksuja. Kiitos mukana tulevan verkkoadapterin, voit myös syöttää virtaa kovalevyille, jotka tarvitsevat 12V.,

Kovalevyjen liitäntä tietokoneeseen rekisteröidään yksittäisinä yksikköinä (JBOD). Viimeinen menestyksen avain on kyky kloonata kovalevyjä asemassa vain yhdellä napin painallluksella ilman, että täytyy olla kytkettynä tietokoneeseen.

Mitat (LxSxK): 125x140x73mm

29.05.2020

IB-121CL-6G

98,90 €